AD9993是AD公司的一款高速/宽带编解码器和模拟前端产品，AD9993是集成式混合信号前端 MxFE，本站介绍了AD9993的封装应用图解、特点和优点、功能等，并给出了与AD9993相关的AD元器件型号供参考。
AD9993 - 集成式混合信号前端 MxFE - 高速/宽带编解码器和模拟前端 - 模数转换器 (ADC) - Analog Devices, LLC
AD9993是一款混合信号前端(MxFE)器件，集成四个14位ADC和两个14位DAC。 图1显示了该MxFE的框图。 通过串行外设接口(SPI)访问寄存器，可对MxFE编程。 ADC和DAC数据路径包括FIFO缓冲器，可吸收LVDS通道时钟与数据转换器采样时钟之间的相位差。
MxFE DAC属于ADI公司高速CMOS DAC内核系列产品。 这些DAC设计用于宽带宽通信系统发送器(Tx)信号链。
MxFE ADC是多级流水线式CMOS ADC内核，设计用于通信接收器中。
应用
The AD9993-EBZ is the evaluation board for the AD9993 which is a mixed-signal front-end (MxFE®) device that integrates four 14-bit ADCs and two 14-bit DACs.
The MxFE is programmable using registers accessed via a serial peripheral interface (SPI). ADC and DAC data paths include FIFO buffers to absorb phase differences between LVDS lane clocks and the data converter sampling clocks.
The MxFE DACs are part of the Analog Devices, Inc., high speed CMOS DAC core family. These DACs are designed to be used in wide bandwidth communication system transmitter (Tx) signal chains.
The MXFE ADCs are multistage pipelined CMOS ADC cores designed for use in communications receivers.
无
